Volume 5, Issue 2 (13 2012)
ijhe 2012, 5(2): 143-156 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Bagheri A, Moussavi G, Khavanin A. Investigating the Electro-Fenton (EF) Process Performance in Treating Highly Formaldehyde-Polluted Industrial Wastewater. ijhe 2012; 5 (2) :143-156
URL: http://ijhe.tums.ac.ir/article-1-22-en.html
URL: http://ijhe.tums.ac.ir/article-1-22-en.html
1- , moussavi@modares.ac.ir
Abstract: (11308 Views)
MicrosoftInternetExplorer4 Background and Objectives: Formaldehyde is a toxic substance and harmful to human
beings and the environmental health. Therefore, the effluents containing
formaldehyde have to be efficiently treated before discharging into the
environment. This study was aimed at investigating the efficiency of
Electro-Fenton (EF) Process in pre-treating industrial wastewater containing
high concentrations of formaldehyde.
Materials and Methods: The effect of the important operational variables including pH, current density, H2O2 dosage, and reaction time were evaluated on the degradation of 7500 mg/L formaldehyde using batch tests. The EFP batch reactor was consisted of a cylindrical glass column with 5.20 cm in internal diameter and 34.50 cm in height. Working volume of the reactor was 500 mL.
Results: The maximum formaldehyde removal was obtained at alkaline pH of 10, H2O2 concentration of 10 mM/min, current intensity 8.5 mA/cm2, and the reaction time of 6 minute. Furthermore, aerating the EFP cell could enhance the formaldehyde removal. Complete removal of formaldehyde was obtained under the abovementioned operational conditions.
Conclusion: This study demonstrated that the EFP is capable of reducing high concentration of formaldehyde (7500 mg/l) to the level suitable for biological post-treatment.
Materials and Methods: The effect of the important operational variables including pH, current density, H2O2 dosage, and reaction time were evaluated on the degradation of 7500 mg/L formaldehyde using batch tests. The EFP batch reactor was consisted of a cylindrical glass column with 5.20 cm in internal diameter and 34.50 cm in height. Working volume of the reactor was 500 mL.
Results: The maximum formaldehyde removal was obtained at alkaline pH of 10, H2O2 concentration of 10 mM/min, current intensity 8.5 mA/cm2, and the reaction time of 6 minute. Furthermore, aerating the EFP cell could enhance the formaldehyde removal. Complete removal of formaldehyde was obtained under the abovementioned operational conditions.
Conclusion: This study demonstrated that the EFP is capable of reducing high concentration of formaldehyde (7500 mg/l) to the level suitable for biological post-treatment.
Type of Study: Research |
Subject:
General
Received: 2011/08/6 | Accepted: 2011/11/2 | Published: 2013/09/30
Received: 2011/08/6 | Accepted: 2011/11/2 | Published: 2013/09/30
Send email to the article author
| Rights and Permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
