Volume 5, Issue 4 (15 2013)
ijhe 2013, 5(4): 423-432 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Golbaz S, Jonidi Jafari A, Rezaei Kalantari R. The Study of Fenton Performance in Removal of Cyanide from Aqueous Solution. ijhe 2013; 5 (4) :423-432
URL: http://ijhe.tums.ac.ir/article-1-3-en.html
URL: http://ijhe.tums.ac.ir/article-1-3-en.html
1- , a.jonidi@modares.ac.ir
Abstract: (12685 Views)
MicrosoftInternetExplorer4 Background and Objectives: Cyanide is a toxic pollutant existing in the various
industrial effluents such as iron and steel, coal mining, non-ferrous metals
manufacturing and metal plating. Its presence in water resources and
wastewater, as serious hazardous substances leads to undesirable effects on
both the environment and human. Thus, its concentration control is essential
for human health. The main goal of this study was to evaluate Fenton process
efficiency in cyanide removal from aqueous solution.
Materials and Methods: This is an experimental study Conducted at Lab scale in a batch system. We investigated effect of different variables including pH, mole ratio of Fe2+/ H2O2, contact time, and initial concentration of cyanide. Data were analyzed using Excel software.
Results: We found that cyanide with initial concentrations of 0.4 mM/L was reduced by 92 %. This removal result was related to oxidizing agent of hydroxyl radicals under optimum conditions including pH = 4, molar ratio Fe2+/ H2O2= 0.046 (Fe2+=0.27 mM/L) after 6o min reaction time. An increase in reaction time was not improved cyanide removal efficiency. Moreover, the Fenton process efficiency in cyanide removal decreased from 92 to 60 %, by increasing the initial cyanide concentration from 0.4 to 0.6 mM/L.
Conclusion: It can be concluded that Fenton oxidation Process can be considered as a suitable alternative for cyanide removal to achieve environmental standards.
Materials and Methods: This is an experimental study Conducted at Lab scale in a batch system. We investigated effect of different variables including pH, mole ratio of Fe2+/ H2O2, contact time, and initial concentration of cyanide. Data were analyzed using Excel software.
Results: We found that cyanide with initial concentrations of 0.4 mM/L was reduced by 92 %. This removal result was related to oxidizing agent of hydroxyl radicals under optimum conditions including pH = 4, molar ratio Fe2+/ H2O2= 0.046 (Fe2+=0.27 mM/L) after 6o min reaction time. An increase in reaction time was not improved cyanide removal efficiency. Moreover, the Fenton process efficiency in cyanide removal decreased from 92 to 60 %, by increasing the initial cyanide concentration from 0.4 to 0.6 mM/L.
Conclusion: It can be concluded that Fenton oxidation Process can be considered as a suitable alternative for cyanide removal to achieve environmental standards.
Type of Study: Research |
Subject:
General
Received: 2011/07/18 | Accepted: 2011/10/16 | Published: 2013/01/30
Received: 2011/07/18 | Accepted: 2011/10/16 | Published: 2013/01/30
Send email to the article author
| Rights and Permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
