Volume 5, Issue 3 (21 2012)
ijhe 2012, 5(3): 387-398 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Hassanvand M S, Torkian A, Sahebnasagh M R, Naddafi K, Moayyedi M K. Experimental Investigation of the Effectiveness of Various Additives in Reducing Wind Erosion from Iron Ore Piles . ijhe 2012; 5 (3) :387-398
URL: http://ijhe.tums.ac.ir/article-1-5246-en.html
URL: http://ijhe.tums.ac.ir/article-1-5246-en.html
Mohammad Sadegh Hassanvand 
, Ayoub Torkian * 1, Mohammad Reza Sahebnasagh , Kazem Naddafi , Mohammad Kazem Moayyedi
, Ayoub Torkian * 1, Mohammad Reza Sahebnasagh , Kazem Naddafi , Mohammad Kazem Moayyedi
1- , torkian@sharif.edu
Abstract: (7699 Views)
MicrosoftInternetExplorer4 Background and
Objectives: Wind-induced particulate air pollution from iron ore piles can
causes environmental and economic problems for steel industries. In this
experimental study, the effectiveness of various additives in reducing
particulate air pollution from iron ore piles was investigated in a laboratory
wind tunnel.
Materials and Methods: The experimental set up consisted of a prismatic pile and a wind tunnel. Four different wind speeds of 4.3, 5, 7 and 11 m/s was used in the study Municipal water, quick lime (2%), seawater, treated industrial wastewater and Polylatice (0.25%) were used as additives to stabilize the upper layer of the pile.
Results: Emission factors for non-stabilized (without additive) piles at 4.3, 5, 7 and 11 m /s wind speeds were 46.7, 73.2, 1025.4 and 13768.7 g/m2, respectively. Stabilized piles with 2.6, 2.7, 2.8, 2.7 and 2.8 percent additive (moisture content of the upper layer of the pile) for municipal water, Polylattice (0.25%), treated industrial wastewater, seawater and quick lime (2%) indicated a decrease of 99.4%, 100%, 99.3%, 99.5% and 99.5% particulate emission reduction, respectively.
Conclusions: Proper selection and use of additives on iron piles has the potential for decreasing more than 99% of the wind-induced particulate emissions. Operational factors such as covered area, spray frequency, pile geometry, seasonal adjustments related to ambient temperature and humidity, wind speed and operator training need to be an integral part of the pollutant reduction program.
Materials and Methods: The experimental set up consisted of a prismatic pile and a wind tunnel. Four different wind speeds of 4.3, 5, 7 and 11 m/s was used in the study Municipal water, quick lime (2%), seawater, treated industrial wastewater and Polylatice (0.25%) were used as additives to stabilize the upper layer of the pile.
Results: Emission factors for non-stabilized (without additive) piles at 4.3, 5, 7 and 11 m /s wind speeds were 46.7, 73.2, 1025.4 and 13768.7 g/m2, respectively. Stabilized piles with 2.6, 2.7, 2.8, 2.7 and 2.8 percent additive (moisture content of the upper layer of the pile) for municipal water, Polylattice (0.25%), treated industrial wastewater, seawater and quick lime (2%) indicated a decrease of 99.4%, 100%, 99.3%, 99.5% and 99.5% particulate emission reduction, respectively.
Conclusions: Proper selection and use of additives on iron piles has the potential for decreasing more than 99% of the wind-induced particulate emissions. Operational factors such as covered area, spray frequency, pile geometry, seasonal adjustments related to ambient temperature and humidity, wind speed and operator training need to be an integral part of the pollutant reduction program.
Type of Study: Research |
Subject:
General
Received: 2014/06/1 | Accepted: 2014/06/1 | Published: 2014/06/1
Received: 2014/06/1 | Accepted: 2014/06/1 | Published: 2014/06/1
Send email to the article author
| Rights and Permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
