Volume 23, Issue 1 (22 2010)
jdm 2010, 23(1): 61-65 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Ghoveizi R, Omati Shabestari G, Mirfazaelian A, Sadrimanesh R, Mangali A. Fabrication of a radiographic and surgical stent for maxillofacial implants: a case report. jdm 2010; 23 (1) :61-65
URL: http://jdm.tums.ac.ir/article-1-116-en.html
URL: http://jdm.tums.ac.ir/article-1-116-en.html
Abstract: (7472 Views)
A procedure was explained to fabricate a surgical stent to aid the placement of maxillofacial implants for prosthetic auricular rehabilitation. An impression of the defect was made, and a wax pattern of the missing ear completed and evaluated on the patient. The definitive wax prosthesis was processed in clear acrylic resin. Also an occlusal maxillary splint was fabricated and joined to the acrylic resin ear by using an extraoral acrylic resin bar. Surgical stent provides proper orientation of the acrylic resin ear while remaining attached to the maxillary arch. This surgical stent can also be used for radiographic examination.
Type of Study: Research |
Subject:
general
Received: 2009/08/6 | Accepted: 2010/04/21 | Published: 2013/09/25
Received: 2009/08/6 | Accepted: 2010/04/21 | Published: 2013/09/25
Send email to the article author
| Rights and Permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
