Volume 30, Issue 3 (10-2017)
jdm 2017, 30(3): 156-163 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Kamran M H L, Hatami M, Tafti A F, Malekzadeh M. The effect of Sandblasting and Laser surface treatment on shear bond strength between zirconia and porcelain veneer. jdm 2017; 30 (3) :156-163
URL: http://jdm.tums.ac.ir/article-1-5681-en.html
URL: http://jdm.tums.ac.ir/article-1-5681-en.html
1- Associate Professor, Department of Prosthodontics, School of Dentistry, Sahid Sadoughi University of Medical Sciences, Yazd, Iran
2- Assistant Professor, Department of Prosthodontics, School of Dentistry, Sahid Sadoughi University of Medical Sciences, Yazd, Iran
3- Post-Graduate Student, Department of Prosthodontics, School of Dentistry, Sahid Sadoughi University of Medical Sciences, Yazd, Iran
2- Assistant Professor, Department of Prosthodontics, School of Dentistry, Sahid Sadoughi University of Medical Sciences, Yazd, Iran
3- Post-Graduate Student, Department of Prosthodontics, School of Dentistry, Sahid Sadoughi University of Medical Sciences, Yazd, Iran
Abstract: (33671 Views)
Background and Aims: To create a good adhesion between porcelain veneers and zirconia restorations has been important issues is the prosthesis. The aim of this study was to identify an effective way to prepare the zirconia surface infrastructure to increase its shear bond strength to the porcelain veneer.
Materials and Methods: 75 samples of zirconia (Y-TZP) cylinders (diameter of 7 mm and a thickness of 3 mm) were fabricated. Based on the surface treatment, specimens were randomly divided into 3 groups: control, air abrasion and
Er-YAG laser. After surface treatment, the specimen surfaces were examined by SEM. Using a metal mold, the porcelain was veneered on the zirconia surface and then fired. After thermocycling, the shear bond strength of porcelain to zirconia was measured and then the failure mode of each specimen was analyzed using a stereo-microscope. Data were analyzed by one-way ANOVA and Tukey test.
Results: Significant differences were observed between the mean shear bond strength of different groups (P=0.001). The greatest amount of shear bond strength was observed in the group (S) and the lowest bond strength in the control group. Analysis of failure modes showed no statistically significant difference in the type of failure among study groups. The adhesive failure was predominating failure at the intersection of porcelain veneers.
Conclusion: The highest shear bond strength between zirconia and porcelain was achieved by sandblasting the zirconia surfaces compare with that of Er_YAG application.
Materials and Methods: 75 samples of zirconia (Y-TZP) cylinders (diameter of 7 mm and a thickness of 3 mm) were fabricated. Based on the surface treatment, specimens were randomly divided into 3 groups: control, air abrasion and
Er-YAG laser. After surface treatment, the specimen surfaces were examined by SEM. Using a metal mold, the porcelain was veneered on the zirconia surface and then fired. After thermocycling, the shear bond strength of porcelain to zirconia was measured and then the failure mode of each specimen was analyzed using a stereo-microscope. Data were analyzed by one-way ANOVA and Tukey test.
Results: Significant differences were observed between the mean shear bond strength of different groups (P=0.001). The greatest amount of shear bond strength was observed in the group (S) and the lowest bond strength in the control group. Analysis of failure modes showed no statistically significant difference in the type of failure among study groups. The adhesive failure was predominating failure at the intersection of porcelain veneers.
Conclusion: The highest shear bond strength between zirconia and porcelain was achieved by sandblasting the zirconia surfaces compare with that of Er_YAG application.
Type of Study: Research |
Subject:
general
Received: 2017/12/5 | Accepted: 2017/12/5 | Published: 2017/12/5
Received: 2017/12/5 | Accepted: 2017/12/5 | Published: 2017/12/5
Send email to the article author
| Rights and Permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
