Volume 32, Issue 1 (7-2019)
jdm 2019, 32(1): 22-28 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Alikhasi M, Ameri N, Siadat H, Shamshiri A R, Nejati M. Dimensional changes of three-unit implant-supported zirconia frameworks from scanning to sintering. jdm 2019; 32 (1) :22-28
URL: http://jdm.tums.ac.ir/article-1-5866-en.html
URL: http://jdm.tums.ac.ir/article-1-5866-en.html
Marzieh Alikhasi1 
, Narges Ameri * 2, Hakimeh Siadat3 , Ahmad Reza Shamshiri4 , Mohammadreza Nejati5
, Narges Ameri * 2, Hakimeh Siadat3 , Ahmad Reza Shamshiri4 , Mohammadreza Nejati5
1- Associate Professor, Department of Prosthodontics, School of Dentistry, Tehran University of Medical Sciences, Tehran, Iran; Member of Dental Research Center, Dentistry Research Institute, Tehran University of Medical Sciences, Tehran, Iran
2- Assistant Professor, Department of Prosthodontics, School of Dentistry, International Campus, Tehran University of Medical Sciences, Tehran, Iran
3- Associate Professor, Dental Research Center, Dentistry Research Institute, Department of Prosthodontics, School of Dentistry, Tehran University of Medical Sciences, Tehran, Iran
4- Assistant Professor, Department of Epidemiology and Statistics, School of Public Health, Tehran University of Medical Sciences, Tehran, Iran
5- Nano Robotics Laboratory, Department of Mechanical Engineering, Sharif University of Technology, Tehran, Iran
2- Assistant Professor, Department of Prosthodontics, School of Dentistry, International Campus, Tehran University of Medical Sciences, Tehran, Iran
3- Associate Professor, Dental Research Center, Dentistry Research Institute, Department of Prosthodontics, School of Dentistry, Tehran University of Medical Sciences, Tehran, Iran
4- Assistant Professor, Department of Epidemiology and Statistics, School of Public Health, Tehran University of Medical Sciences, Tehran, Iran
5- Nano Robotics Laboratory, Department of Mechanical Engineering, Sharif University of Technology, Tehran, Iran
Abstract: (2614 Views)
Background and Aims: Passive fitness of implant frameworks are important factors for long-term success of dental implant restorations. The aim of this in vitro study was to evaluate the dimensional changes of implant supported zirconia frameworks fabricated by Zirkonzahn CAD/CAM system during fabrication stages.
Materials and Methods: The master model of 3-unit FDP was made of two implant abutments. The master model was scanned 12 times and data were saved as STL files (scanning groups). Using semi-sintered zirconia,
12 real-size frameworks (milling groups) and 12 enlarged frameworks which were then sintered (sintering group) were made in this system. Dimensions of master model and specimens of each stage were measured. The dimensional changes in respect to master model were calculated. Data were analyzed using Repeated measures ANOVA, independent t-test, and paired sample t-test at α=0.05 of significance.
Results: The milling stage showed greater dimensional changes comparing to the other stages (P<0.05). At all stages, the dimensional changes of premolar abutment height were greater than canine (P<0.001).
Conclusion: Within the limitations of this study, the results suggested that the fabrication stages and size of abutments had significant effects on the dimensional changes of zirconia frameworks.
Materials and Methods: The master model of 3-unit FDP was made of two implant abutments. The master model was scanned 12 times and data were saved as STL files (scanning groups). Using semi-sintered zirconia,
12 real-size frameworks (milling groups) and 12 enlarged frameworks which were then sintered (sintering group) were made in this system. Dimensions of master model and specimens of each stage were measured. The dimensional changes in respect to master model were calculated. Data were analyzed using Repeated measures ANOVA, independent t-test, and paired sample t-test at α=0.05 of significance.
Results: The milling stage showed greater dimensional changes comparing to the other stages (P<0.05). At all stages, the dimensional changes of premolar abutment height were greater than canine (P<0.001).
Conclusion: Within the limitations of this study, the results suggested that the fabrication stages and size of abutments had significant effects on the dimensional changes of zirconia frameworks.
Type of Study: Research |
Subject:
general
Received: 2019/07/2 | Accepted: 2019/07/2 | Published: 2019/07/2
Received: 2019/07/2 | Accepted: 2019/07/2 | Published: 2019/07/2
Send email to the article author
| Rights and Permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
