Volume 10, Issue 2 (24 2012)
sjsph 2012, 10(2): 47-58 |
Back to browse issues page
Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:
Golbabaei F, Faghihi-Zarandi A, Shokri A, Baneshi M, Ebrahimnejad P, Sedigh Zadeh A. Evaluation of submicron particle filtration efficiency of domestic and imported surgical masks. sjsph 2012; 10 (2) :47-58
URL: http://sjsph.tums.ac.ir/article-1-22-en.html
URL: http://sjsph.tums.ac.ir/article-1-22-en.html
Farideh Golbabaei 
, Ali Faghihi-Zarandi * 1, Ahmadreza Shokri , Mohammadreza Baneshi , Pedram Ebrahimnejad , Asghar Sedigh Zadeh
, Ali Faghihi-Zarandi * 1, Ahmadreza Shokri , Mohammadreza Baneshi , Pedram Ebrahimnejad , Asghar Sedigh Zadeh
Abstract: (10200 Views)
Background and Aim: Bioaerosols are one of the most important agents that cause post operating infections in hospitals. Surgical masks are recommended for prevention of bioaerosols transmition in operating rooms. This study aimed at evaluation of submicron particle filtration efficiency of domestic and imported surgical masks.
Materials and Methods: In this cross sectional study, 5 types of surgical masks that have the most utilization in operating rooms of country’s hospitals including domestic and imported surgical masks were tested. To evaluate all samples, the submicron particle filtration measurements were carried out based on ISIRI 6138 and American DOP standards. Filtration efficiency calculations and pressure drop measurements were performed and the results were analyzed using statistical tests.
Results: Results showed that particle filtration efficiency of domestic and imported masks were 56.130% (±10.7) and 31.906% (±7.062) respectively. Also, filtration efficiency in domestic masks were more than imported masks (P> 0.001). Among all samples, Arman mask had the most filtration efficiency (66.5475 % ±6.14951), where the least (27.8275 % ±4.44152) filtration efficiency (P> 0.001) belongs to Blosom. The maximum mean of pressure drop in Arman mask (35 ±2. 58 Pa) and the least mean of pressure drop in Zist filter mask (11 ±1.82 Pa) were observed. According to the effect of filtration efficiency and pressure drop on general quality of mask, the quality factor of masks were also evaluated. Results showed that Zist filter mask had the most quality factor (0.068) while Blosom had the least quality factor (0.016).
Conclusion: This research showed that domestic surgical masks have a better quality toward imported surgical masks but can not obtained quality confirmed by standards, yet. To reduce respective infections and prevalence of diseases, it is recommended using filters with suitable physical characteristics and also carrying out test of surgical masks before supplying.
Materials and Methods: In this cross sectional study, 5 types of surgical masks that have the most utilization in operating rooms of country’s hospitals including domestic and imported surgical masks were tested. To evaluate all samples, the submicron particle filtration measurements were carried out based on ISIRI 6138 and American DOP standards. Filtration efficiency calculations and pressure drop measurements were performed and the results were analyzed using statistical tests.
Results: Results showed that particle filtration efficiency of domestic and imported masks were 56.130% (±10.7) and 31.906% (±7.062) respectively. Also, filtration efficiency in domestic masks were more than imported masks (P> 0.001). Among all samples, Arman mask had the most filtration efficiency (66.5475 % ±6.14951), where the least (27.8275 % ±4.44152) filtration efficiency (P> 0.001) belongs to Blosom. The maximum mean of pressure drop in Arman mask (35 ±2. 58 Pa) and the least mean of pressure drop in Zist filter mask (11 ±1.82 Pa) were observed. According to the effect of filtration efficiency and pressure drop on general quality of mask, the quality factor of masks were also evaluated. Results showed that Zist filter mask had the most quality factor (0.068) while Blosom had the least quality factor (0.016).
Conclusion: This research showed that domestic surgical masks have a better quality toward imported surgical masks but can not obtained quality confirmed by standards, yet. To reduce respective infections and prevalence of diseases, it is recommended using filters with suitable physical characteristics and also carrying out test of surgical masks before supplying.
Keywords: Domestic surgical masks, Imported surgical masks, Particle filtration efficiency, DOP test
Type of Study: Research |
Subject:
General
Received: 2011/11/13 | Accepted: 2012/02/14 | Published: 2013/08/8
Received: 2011/11/13 | Accepted: 2012/02/14 | Published: 2013/08/8
| Rights and permissions | |
 |
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. |
