Journal of School of Public Health and

---

The purpose of this study was to measure ambient lead concentrations in Tehran's 12th Municipal District and also Pb concentrations in urine samples from municipal workers assigned to the same region. In this research workers from the 12th District were matched and compared with a control group who were doing the same type of work in another region in northern Tehran with lighter traffic and comparatively clean air.Air samples were analyzed by atomic absorption techniques. Results showed the mean air concentration of lead to be higher than standard (1.5ug/m3) except on Fridays and Thursdays (1.9±0.32). The end-shift urine samples were prepared and analyzed using the HSE method. Lead levels in 77.1% of the urine samples were higher than HSE-recommended limits (643.86±353.73). The independent t-testindicated that the mean urine Pb concentration in the case group was significantly higher than in controls (p<0.001). Mean urine lead levels in smokers were significantly higher than non-smokers in case group (p^0.043). The Pearson Correlation test showed a significant relationship between urine Pb concentration and age, duration of employment, and smoking habit in case workers (r=0.427, p= 0.011, r=0.385, p=0.632 and r=0.632, p=0.009 respectively). Also, the Kruskal-Wallis test indicated that urine lead levels were independent of the workers'education level and work shifts.

---

Background and Aim: Lead is a toxic metal used in different industries and occupational and environmental exposure to it is quite likely to occur. Because of its high potential toxicity, serious damages to those exposed to it are common. Since the ceramic industry, in which lead is used, is considered a domestic industry in Iran, in this study occupational exposure of glaze workers to lead was assessed in a ceramic industry.

Materials and Methods: A total of 55 glaze workers (39 tillers and 16 potters) were selected as the case group. Association of lead concentration with several variables, including work shift, work type, ventilation system, and the number of extra work hours during the previous month, was determined. A sampling pump (SKC Co.) and ester cellulose filters with a pore size of 0.8 µm, 37 mm in diameter, were used for sampling. The flow-rate was adjusted at 2 l/min based on the NIOSH 7300 method. After sampling, filters were transferred to the laboratory and digested in a mixture of nitric acid and per chlorate solution (4:1) and analyzed by ICP-AES. To minimize probable errors and pollution during sampling and sample handling, samples were also taken from employees in the administration department to serve as control. Spiro metric tests were performed on both the case and the control groups.

Results: The lead concentrations were higher than the threshold limit value (TLV) (0.17 mg/m). Independent t-test showed that there was a significant relation between concentration of the lead present in the breathing zone air and 2 independent variables, including shifts work (morning and afternoon) and the ventilation system among tillers. Also, based on the one-way ANOVA, there was a significant relation between concentration of the lead present in the breathing zone and the number of extra working hours over the shift.

Conclusion: The mean lead concentration in the breathing zone was higher than the respective TLV. Considering the hazardous nature of lead, protective measures─ personal, occupational and environmental─ should be taken. Moreover, clinical examination of job applicants at the time of employment, as well as periodic examinations and Spiro metric tests on the workers, are also strongly recommended.

---

Background and Aim: The objective of this study was to determine the contents of heavy metals Hg, Cd and Pb in the muscle, liver and gill tissues of Liza abu fish in the Dez and Bahmanshir Rivers in Khoozestan Province, Iran in winter 2010. 

Materials and Methods: The study included 108 samples of Liza abu tissues. The metals were extracted from the tissues using the wet-digestion method and their concentrations were determined by atomic absorption spectrophotometer Perkin Elmer 4100. Analysis of the data was done using the SPSS17 software, the statistical test being the t-test ((p≤0.05).). 

Results: The highest concentrations (mg/Kg) of Hg (0.029±0.005), Cd (0.506±0.047) and Pb (1.07±0.096) were found in the gill and their lowest concentrations, 0.023±0.001, 0.346±0.040 and 0.903±0.030, respectively, in the muscle. The concentrations of Cd in the gull, muscle and liver were significantly different (p≤0.05) between the Dez and Bahmanshir River fish samples, but the differences with regard to Hg and Pb concentrations were not different between the 2 rivers (p≥0.05). 

Conclusion: The mercury content of Liza abu tissues was lower, while the lead and cadmium contents were higher, than the respective WHO standards (permitted levels).

---

  Background and Aim: Chlorophenols are acidic Organic compounds and priority Pollutants. One of the best ways to removal chlorophenols was using different absorbents . In this study, removal efficiency of ortho- chlorophenol as one of the most common organic contaminants in aquatic environments was investigated with absorption method using activated Fly Ash.

  Materials and methods: In this experimental study, Fly ash of collected from Zarand Power plant was activated by sulfuric acid. Factors affecting in sorbent activation process including temperature, time, amount and concentration of the acid and also factors influencing in the adsorption process were adjusted for optimum conditions. Experiments was followed on real wastewater samples from coal washing plant of zarand . Data was analyzed by SPSS software.

  Results : The sorbent activation was performed in optimized condition acid concentration 1.8 mM, time 5h, temperature 29±2˚C and acid/fly ash ratio 7. Removal efficiency of zarand coal washing plant Effluent at the optimal conditions (pH: 2, adsorbent doze: 1g, time: 3h) was 84.4%.

  Conclusion: In addition to the high efficiency of ortho-chlorophenol absorption because of sorbent activation does not require complex and expensive technology, the adsorbents can be used to remove these contaminants from industry effluent.